Description
The digital insulation tester model MD10KVx is TENTECH's cutting edge insulation analyzer equipment and it is one of the most complete and sophisticated available in the international market. A software allows for further analysis of tests results, including features such as graphical representation and automatic report generation. Its proven technology provides safe, reliable and accurate measurements of insulation resistances up to 10 TΩ, with 4 pre-selected test voltages, 500 V - 1 kV - 5 kV - 10 kV. Other test voltages may be selected in steps of 25 V, 100 V or 500 V.
A state-of-the-art microprocessor controls the equipment operation and enables the incorporation of advanced features which make measurements easier: auto-range selection, 4000 readings memory, AC/DC voltmeter, automatic measurement of absorption index and polarization index, leakage current and capacitance measurement, timer enabling programming of test duration, configurable pass-fail test, step voltage test, real time clock and calendar. Built-in chronometer, indicating elapsed time, in minutes and seconds, since the test started, up to 90 minutes.
Measured values are transmitted through the USB interface and are printed in the built-in printer as a registration of the performed test. Furthermore, the measured values are stored in a non-volatile internal memory. Up to 4000 measured values may be stored, to be transferred afterward to a computer running the T-Logger program. This software allows a further analysis of the test results, including a graphical representation and automatic report generation. The real time clock and calendar, and the sequential test number, facilitates the identification of each test, and the organization of a predictive maintenance system by trend analysis. The MD10KVx has a Bluetooth interface that allows remote control of it through a Android device with TENTECH's app. With it you can take the photos of the objects under test and the GPS coordinates of each. It also allows you to record voice comments for each measurement.
The MD10KVx is powered by a rechargeable LFP battery. The cabinet is strong and lightweight, easy to carry, impact-resistant and suitable to be used under severe weather conditions. Thus the megohmmeter supplies very reliable and accurate measurements both in laboratory and out in the field.
Specifications
Test voltage
500 V, 1 kV, 5 kV, 10 kV directly, one button selectable.
500 V to 10 kV in 25 V, 100 V or 500 V steps. DC, negative.
Maximum resistance reading
10 TΩ @ 5 kV up to 10 kV.
5 TΩ @ 1 kV up to 4.99 kV.
1 TΩ @ 525 V up to 999 V.
500 GΩ @ 500 V.
DC voltmeter
15 V up to 600 VDC.
Accuracy: ±(5 % of reading + 3 digits).
AC voltmeter
15 V up to 600 VRMS.
Accuracy: ±(5 % of reading + 3 digits).
Leakage current measurement
1 nA up to 1500 µA
Accuracy: ±(10 % of reading + 3 digits).
Capacitance measurement
50 nF up to 10 µF @ 500 V.
50 nF up to 5 µF @ 1,000 V.
30 nF up to 2 µF @ 2,500 V.
30 nF up to 1 µF @ 5,000 V.
30 nF up to 680 nF @ 10,000 V.
Accuracy: ±10 % of reading ± 3 digits.
Short circuit
Max. 2 mA.
Test voltages accuracy
± 3 % of nominal test voltages on 10 GΩ.
Insulation tester basic accuracy
± 5 % of reading from 1 MΩ to 1 TΩ @ 10 kV.
± 20 % of reading from 1 TΩ to 10 TΩ @ 10 kV.
(for lower test voltages, the upper limit will be reduced proportionally)
± 20 % of reading ± 5 digits from 10 kΩ to 100 kΩ.
± 10 % of reading ± 5 digits from 100 kΩ to 1 MΩ.
Advanced features
• Automated polarization index calculation.
• Automated dielectric absorption ratio calculation.
• Programmable pass-fail test.
• Step voltage test.
• 4000 measured values.
• Switchable filter to remove external noise interference.
Built-in printer
Prints elapsed time, actual voltage and resistance measured each 15 seconds.
Built-in chronometer
Shows elapsed time in mm:ss format. Count starts automatically for each measurement
Interface
USB.
Environmental protection
IP65 (with closed lid).
Overvoltage category
CAT III - 600 V.
Safety class
In accordance with IEC 61010-1.
E.M.C.
In accordance with IEC 61326-1.
Electromagnetic irradiation immunity
In accordance with IEC 61000-4-3.
Electrostatic immunity
In accordance with IEC 61000-4-2.
Power supply
Internal rechargeable LFP battery 12 V - 6000 mAh.
Battery charger
AC adapter 12 V - 2 A. (Input 90 - 260 V~ 45-65 Hz).
Operating temperature range
14 °F to 122 °F (-10 °C to 50 °C).
Storage temperature range
-13 °F to 158 °F (-25 °C to 70 °C).
Humidity range
95 % HR (non condensing).
Equipment weight
Approx. 13.88 lb (6.3 kg).
Dimensions
15.98" x 12.99" x 6.85" (406 x 330 x 174 mm)
