Tentech's HP30KV smart DC hipot is a cutting-edge dielectric test instrument designed with an emphasis on operator safety, versatility and ease of use. Complying with the most rigorous safety requirements, the system is divided into two modules, a control unit and a high voltage generation unit.
Additional safety features include an emergency stop switch and a built-in sound alarm. Furthermore, the ability to fully remote control the instrument from an Android device — both to program the settings as well as to perform the tests — provides increased safety protection and greater comfort for the operator.
HP30KV’s built-in microprocessor allows the user to adjust the output voltage, test duration, maximum leakage current and ramp slope, allowing for more complex tests to be carried out automatically.
2,000 V up to 30,000 V.
Test Voltage Resolution
100 V between 10 kV and 30 kV.
10 V up to 9.99 kV.
Test voltage accuracy
± (2% of nominal value ± 2 digits) with 1 mA load.
Negative voltage, ground positive.
Max. 20 mA.
Leakage current resolution
Leakage current accuracy
± (2% of nominal value ± 2 digits).
Remote control via Bluetooth.
Emergency stop buttons.
Self-detection of sparks.
Visual indicators (LEDs).
"Pass / Fail" and fixed-time tests.
Up to 20 min., indication in seconds.
It allows to transfer the data stored in the equipment memory to a PC, to analyze them, to present the results in tables and graphs, to generate reports of the tests.
IP54 (with closed lid).
In accordance with IEC 61010-1.
Mains: 200-240 V, 50/60 Hz, 720 VA.
14 °F to 122 °F (-10 °C to 50 °C).
-13 °F to 158 °F (-25 °C to 70 °C).
95% RH (non condensing).
Control module: approx. 16.76 lb (7.6 kg).
High voltage module: approx. 17.63 lb (8 kg).
Control module: 17.5" x 14.2" x 7.5" (450 x 360 x 190 mm).
High voltage module: 17.5" x 14.2" x 7.5" (450 x 360 x 190 mm).